Monday, August 31, 2009

Drag racing Victory Motorcycles..

Anyone got time slips? What are the fastest ones doing? How far can you go with these engins?? Street , Strip, Bonneville.. any racing..


Orignal From: Drag racing Victory Motorcycles..

1983 Yamaha Virago 500 Speedometer/Tach Assembly

Help, please? I am looking for a speedometer/tach assembly for a 1983 Yamaha Virago 500 motorcycle. Thanks.


Orignal From: 1983 Yamaha Virago 500 Speedometer/Tach Assembly

which sport bike is the best

hellow everybody, i m new on this board, and new in the world of motorcycling. anyways, i plan to get a ninja 250 for a starter bike, then move on to a larger bike. i m wondering which 600cc sport bike is the best of the bunch; kawasaki zx6r, honda cbr 600, or zuzuki gsx 600, ect. now, i know that every body have their own preferences, i m just interested in the pro/con of each bike. thanks!


Orignal From: which sport bike is the best

touring

sorry new guy here on comp but im looking to find other peeps who have gone on a paid motorcycle tour im thinking of going on one in the dom rep. i have heard both good and wild things about d.r. what about signing up for a tour any one been there and knows i cant find any responses so ill keep trying


Orignal From: touring

fraud,fraud,fraud!!!!!

I was looking for a sportsbike on eBay approximately two weeks ago whe I stumbbled upon a 2005 R6 for sale buy the seller name of Paul Johnson. The bike was selling for very cheap so I inquired. I contatced the high feedback seller at his personal e-mail. the seller stated he was in finacial difficulties and if I wanted,he could close the auction early and we could deal straight up. Bad mistake and a rookie mistake. Never-the-less I ended up sending this idiot close to $3000.00 through what I thought was eBay Buyer Protection escrow plan. Very nice recreated documents and very authentic, I thought. The payment was sent and to make a long story short, I never heard from them again and they are off with my money. So be very careful when bidding, conducting transactions, I learned the hard way! If anyone knows of anyone who has a descent Yamaha R6 available and are willing to work out payment arrangements please let me know. I am a trustworthy person and I made the sad mistake of believing everyone else is too. Don't let this happen to you!Look for the clues: end auction early, cheap shipping or its included in the price, low price for the year and the milage, contacting the seller on personal e-mail, and never, never, eversend money unless it is through pay-pal! I hope people who read this get something out of this and don't get scammed like I did. I don't know how these people can get away with this and without eBay knowing there true identities?????


Orignal From: fraud,fraud,fraud!!!!!

Sunday, August 30, 2009

1970's harley fx

cn anybody tell me what year harley moved the shift and brake levers to the other sides? how many did they produce that way?


Orignal From: 1970's harley fx

CHOPPER ARTIST Dennis McPhail VIRGIN MARY statue where do I list this ?

Hi everyone, the E Bay Motors thread people sent me over here. Hope everyone is having a fun safe weekend. Hey I am out of my element here, trying to sell a really cool statue painted by an artist that is know for his chopper painting, Dennis McPhail. I am conflicted on where to list this. I went ahead and threw it in art but was wondering if you think it would be better suited in motors. It's obviously not your traditional religious art. Any help would be appreciated.


Orignal From: CHOPPER ARTIST Dennis McPhail VIRGIN MARY statue where do I list this ?

Any dirt bikers here? Any used/ NOS bike/ATV parts sellers?

Hi, I'm an old slow short bald dirt biker (not yet fat, but I am working on that too). I'm selling off a bunch of my old parts; they are going about as fast as I can list, sell and ship. I'm going to run out of my own parts to sell pretty quick. Anybody have suggestions about sources for more good used or NOS parts to sell? I checked with the bike and ATV shops here in my little town about doing some consignment sales; the bike guy doesn't even know what he has to sell and can't get his employees to figure it out; the ATV guy is new, so doesn't have the kind of stuff laying around that I would be interested in selling. I'm going to start to hit some garage sales and keep an eye out for that old broken down bike in the corner that I can grab on the cheap; also real-world auctions. Maybe advertise in local papers too. I'm interested in selling all kinds used and NOS parts for all types of bikes and ATVs, not just dirt bikes. Not new stuff or whole bikes or accessories or foo foo stuff; not a space I want to compete in. Just hard parts. I have a new addiction and now I have to feed it. Thanks, Barney


Orignal From: Any dirt bikers here? Any used/ NOS bike/ATV parts sellers?

97 vulcan 1500 classic

hey i am looking for exhaust guards for 1997 kawasaki vulcan 1500 classic exhaust (factory) thanks,Rick


Orignal From: 97 vulcan 1500 classic

Motorcyclists' Rights Group Leader Killed In Crash

Motorcyclists' Rights Group Leader Killed In Crash POSTED: 10:28 am EDT August 31, 2006 UPDATED: 2:03 pm EDT August 31, 2006 EASTON, Md. -- An Eastern Shore man who was the state director of an organization that lobbies for the rights of motorcycle owners was killed while riding his motorcycle. A sport utility vehicle struck Martin L. Schultz's bike Wednesday at an intersection in Easton, according to Maryland State Police. Schultz ran off the road and struck a telephone pole. He died at the scene. The SUV driver, Latasha R. Neal, 25, of Hurlock, was treated at Memorial Hospital at Easton and released. Schultz, 44, of Newcomb, was state director of ABATE (A Brotherhood Against Totalitarian Enactments) of Maryland in Annapolis. The association's members, according to its Web site, "have joined together to advocate training as the foremost means to reducing accidents and injury, to put an end to discriminatory legislation, to communicate via a bimonthly newsletter, to explore ways to improve the overall motorcycling experience in Maryland, and to provide for and assure a continuing freedom and affordability of motorcycling." ABATE opposes mandatory helmet laws and has a "Helmet Law Protest Ride" scheduled for October. State police said a helmet was recovered from the scene of Schultz's crash, but it was not immediately known if he was wearing a helmet at the time of the accident. HUH!?! Maryland has a mandatory helmet law. He was a leader of ABATE. You can't ride any where in the Easton area and not eventually see a police. It's not that rural of an area. He didn't want to pick a fight with the law he only wanted to change the law! What makes them think he wasn't wearing the helmet? Just because he belonged to and was a leader of ABATE? You would think maybe, JUST MAYBE! the helmet was ripped off his head from the force of the impact? I guess that thought never entered their minds. Anyway, it doesn't make for a interesting enough story.(sensationalism) The insensitive information that news reporters print just burns me up.


Orignal From: Motorcyclists' Rights Group Leader Killed In Crash

I think I've regained my sanity

What do you think?


Orignal From: I think I've regained my sanity

HONDA 750 FOUR K6

i JUST THIS VINTAGE BIG OVER THE 4TH OF JULY WEEKEND,IT LOOKS SUPER NICE AND ORINGAL,IT RAN JUST FINE WHEN I PICK IT UP I DROVE IT A FEW MILES;ANY WAY HERE'S THE KICKER I BEEN WORKING ON TWO DAYS IT JUST WON'T START!!!! I HAVE FIRE AT THE PLUG WIRES ITS GOT GAS,I TOOK THE CAPS OFF TO SEE IF THE ROCKERS WERE WORKING THEY ARE SO I GUESS THE TIMING IS GOOD,I'M RUSTY HAVN'T WORKED ON THEM IN 20 YEARS.I CHECKED THE FUSES IS THERE ANY THING THESE K4'S ARE NOTED FOR IF UR HAVING PROBLEMS?IT SOUNDS LIKE SOMEONE HAS THE CUTOFF ON BUT ITS NOT,UNLESS IT WENT BAD BUT IT RAN FINE THE DAY BEFORE ANYWAY HELP!!!! AND THANKS.


Orignal From: HONDA 750 FOUR K6

RC30E RC50 WHAT THE *

i got a basket with a title the VIN starts jh2rc 0509c so its a HONDA RC 50 1982 on the motor serial is JH2RC 30E.... if anyone has any info on a manual i would love to hear from thanks danny


Orignal From: RC30E RC50 WHAT THE *

Carb diaphragms

Hello all. Never posted to the m/c boards before, but really need some help. I have a '91 Venture Royale. It always ran perfectly, up until a few weeks ago. I put the choke on, started it, and it only ran at 1000 RPM, instead of the usual 2500 - 3000RPM. Sounded rough too. Once I took off the choke, it would barely idle, and would quit within a minute. Doesn't run at all without the choke on now. (Sounds like a vacuum leak to me). I checked all the line/hoses, boots, and all look good. I managed to get one of the diaphragms out, and there is a pinhole in it. Two questions:1. Does this sound like the problem? (I'll find out how the other three diaphragms look once I finally get the covers off)2. Can this be repaired with a fuel resistant silicone type sealer, or do I really need to shell out the $300 for diaphragms? Thanks,Doug


Orignal From: Carb diaphragms

Delmarva Bike Week

I know what your thinking, another Bike Week. It's true, it is but, It hasn't been ruined yet. It's still small enough to enjoy. It's in Ocean City Maryland. Nice bars and restaurants on the ocean and bayside. Scenic riding north into Delaware with coastal views....Try the steamed Maryland Blue crabs and crab cakes if you get there. Link


Orignal From: Delmarva Bike Week

Hey Harleyglasses..

So busy ya can't BS anymore? I see your feedback is growing fast! Bikes looking good too! Stop in here and say hi, or at Neds.(The Biker Bar) ..I'll email you the link if ya want!


Orignal From: Hey Harleyglasses..

SAD DAY IN W.VA....MOTORCYCLE CRASH

WELL HERE IS A SAD STORY,TODAY TWO YOUNG MEN WAS RACING IS WAT WAS SAID,NOT SURE THOUGH, WHEN ONE OF THE BIKES A CROTCH ROCKET,HIT A 4 WHEELER ATV THAT WAS CARRYING AN OLDER MAN AND WOMAN.SADLY THE MAN ON THE MOTORCYCLE WAS KILLED IN THE ACCIDENT. PLEASE DRIVE YOUR BIKES THE SPEED LIMIT AND BE CAREFUL ON THEM THEY ARE NOT TOYS AS MANY SAY THEY ARE.MAY GOD BE WITH THE FAMILIES OF THESE PEOPLE.I AM POSTING THIS SO PEOPLE MIGHT BE MORE CAREFUL AND THINK THE NEXT TIME YOU GET ON YOURS...THANKS FOR READING THIS POST


Orignal From: SAD DAY IN W.VA....MOTORCYCLE CRASH

this one's for sky i sold the peddle car

well one guy looked at it and fliped out. When he saw the org ladders and paint , unrestored he had to have it , made me an offer of 700.00 and i laughed at him , replying he bought the ladders now did he want the rest of the peddle car??? I showed him an ebay listing in worse, shape no ladders, it went for 760.00???i think about that time another replied to my news add here and they made me an offer of 1,200.00 as is the first guy bid in front of the other buyer(i love to watch them fight infront of one another) the second person gave me 1500 even and now its gone. Now i have to break the news to the gnomes SIGH p.s. the second person laughed at the first guy when he found out about the 700 offer by saying thought you'd see if he didnt know what he had huh ??guess they have delt with one another befor bad blood maybe??? well any ways one down more to go. OMG i just relized i can afford meat with my mac and cheese woohooo lol good day from the world of gnomed dumm


Orignal From: this one's for sky i sold the peddle car

bike buying fraud!

beware of this guy trying to buy bikes: dellezzon8. i don't know if it's his only target but he screwed us. i put a buy it now on my bike for 1500. i then got the following email from him: HELLO SELLER, I HAVE JUST BOGUTH YOUR ITEM ON EBAY.AND I WILL LIKE TO INFORM YOU THAT I AM BUYING IT FOR MY CLIENT WHO IS USING IT IN WEST AFRICA.HOWEVER HE WILL BE PAYING YOU WITH A CASHIERS CHECK OR MONEY ORDER AS YOU LIKE IT TO BE PAID.ALSO REGARDS THE SHIPPING DOWN TO WEST AFRICA, YOU DONT HAVE TO BOTHER ABOUT IT BECAUSE I HAVE A SHIPPING BROKER WHO WILL TAKE CARE OF THAT FOR ME.ALL I NEED FROM YOU IS YOUR RESPONSE SO THAT WE CAN MAKE ARRANGEMENT FOR PAYMENT.THEN WE CAN ARRANGE FOR THE PICKUP AS SOON AS YOU HAVE RECIEVE THE PAYMENT. I HOPE YOU CAN ALSO TELL ME MORE ABOUT THE PRESENT CONDITION OF THE ITEM. I HOPE TO HEAR FROM YOU AS SOON AS YOU CAN. THANK YOU


Orignal From: bike buying fraud!

1984 honda magna 700

I just purchased this bike and I need some parts for it and I am having trouble finding them can anyone help me out?Thanks


Orignal From: 1984 honda magna 700

Is there a dirt bike category? Can we create one?

Hi, it seems as if this forum is Harley Hell. I'm a dirt biker and would like to interact with others. Can we create a forum for dirt bikers? Vet ebayers, is there a way to do this? Thanks, Barney


Orignal From: Is there a dirt bike category? Can we create one?

set of pipes

high i have a set of kawasaki pipes there are 4 of them i believethey are stock from a large bike...most likely taken off and different ones put on.. i need to find out what kind of bike they came from and stuff ... can someone point me in the right direction thanks------


Orignal From: set of pipes

Harley is selling TRIKES again!!

Harley struck up a deal with Lehman to build OEM trikes with HD powertrain! Perhaps we will see them in trsffic duty again....woder if they will be called Servi-Car?


Orignal From: Harley is selling TRIKES again!!

What's up with this??

Ok, I know chinese sellers get free listings when US, UK and AU sellers had fees jacked up, but is ebay really trying this hard to integrate the chinese??? This is a screen shot from the Blvd, I checked in in Opera and IE both, and checked several other boards as well. Sorry if I stretch the board... The tack has been replaced with this: ___________________________________________


Orignal From: What's up with this??

Should this board be renamed?

This board seems to be oriented toward Harleys and the anguish associated with riding one. Should it be renamed or should there be a different structure?


Orignal From: Should this board be renamed?

Safe Harbor and Invoice.com

I agreed to buy an ATV that was listed but then was gone. I had the sellers email address and so I sent an email asking if the item was still for sale. She said it was and I emailed again, lets do it. I then got an invoice from "ebay@invoice.com" instrycting me on how the trNSaction would be completed. I was to wire the money to an account at the Bank of America in Maryland, where the safeharbor people would hold the money until I got the atv. When I got it I would have 3 days to inspect it, then let them know if it was what I thought it would be and then they would release the money to the aeller. The also had me fax a copy of the wire form to a number so they could check with Bank of America to see if it had arrived. Then I got an email from the seller saying she got an email from ebay that I had paid and she said she would ship it today (9/11/06). I emailed asking for shipping details, but I have yet to get a reply from the seller who is located in southern California. Ebay has been no help in telling me if this is how they handle these transactions. Should I go to the FBI and report wire fraud? I hate to do that until I know more because what if it's legit? A co-worker said the email is a fake because it came from invoice.com. I have emailed them as well, but have yet to hear from them. All I get from ebay is standard computer generated stuff, nothing personal to my situation. Please advise....


Orignal From: Safe Harbor and Invoice.com

bmw r100 oil cooler

Anyone out there with a used oem bmw oil cooler complete for my 1979 r100. Cannot locate any in my area, and of course they are not available through bmw. Sure would like to find one.


Orignal From: bmw r100 oil cooler

Problem with hosting my bike

I just put my YZ85 on ebay. Its been almost 24 hours and it hasnt appearded on ebay! It is in My Ebay but not on the actula site! could someone plz help?


Orignal From: Problem with hosting my bike

They Made Me An Offer I Couldn't Refuse...

It occured to me that I just don't get to ride as much as I'd like to because the shop keeps me busy even most weekends.. I haven't taken a vacation since 93, unless you count the dealer shows that drag me away for 5 days a year.... So when I got an offer to sell.... I said WTF...why not...? It has been a long process as the buyer had a lot of ducks to get in a row to take over the franchise.... But it looks like next wednesday... I'll be a civilian... Where to ride to and back first.....


Orignal From: They Made Me An Offer I Couldn't Refuse...

suggestions what I should do with this custom?

I've tried to sell this 02 Honda Nighthawk 250 custom chopper on eBay 3 times now, no bites. Link It has a rebuilt/restored Utah title, 17,000 miles, runs great gets ~70 mpg, handles like a chopper I really need to just get some cash for the thing now. Everythings gone through my mind now, even parting it out and using the motor in a custom go-cart project.


Orignal From: suggestions what I should do with this custom?

Billy Lane Post removed??

WHY?? are we not allowed to discuss the News? blood alcohol levels taken at the scene show that Lane was over the state's .08 limit, Trooper Kim Miller, spokesman for the highway patrol said the state could pursue DUI manslaughter charges and/or vehicular homicide charges, along with other lesser-offense traffic citations. Advertisement "He did pass on the double yellow line so he is definitely at fault in the crash," Miller said. She added that the state must wait to file any charges until they have all the evidence in the case in order to avoid double jeopardy. While Miller said it could take six to eight weeks to get the blood alcohol levels back from the lab, the state has asked for a rush order on the results. However, Miller said in Florida officers don't automatically take blood alcohol levels after a fatal crash, and they have to have probable cause in order to conduct the test. "We do believe he was impaired," Miller said. The accident occurred at approximately 9 p.m., Monday, Sept. 4, south of Melbourne Beach where Lane resides. According to police reports, Lane was attempting to pass two vehicles on a double-lane section of road when his 2006 Dodge pickup hit a 1983 Yamaha moped head-on. The crash killed 56-year old Gerald Morelock, who was driving the moped. Erin Derrick, 22, who was riding with Lane, suffered serious injuries but was treated and released at the local hospital. Lane was also treated for minor injuries and released. Lane, who owns Choppers Inc. in Melbourne, Fla., has become well known through appearances on the Discovery Channel's "Biker Buildoff" and "Monster Garage." Lane is also known locally for his efforts to raise money for the Children's Care Rehab and Development Center in Rapid City during the Sturgis Motorcycle Rally. Link 17169667

Orignal From: Billy Lane Post removed??

Who from Motorcycle Blvd. interested to meet at Sturgis in August?

I was thinking, who from Motorcycle Blvd is planning to go to Sturgis in August and would like to meet? If there's interest we could make a time/place to meet.


Orignal From: Who from Motorcycle Blvd. interested to meet at Sturgis in August?

Looking for parts

Hello Boulevard, I just got my first bike (im 15) and It's a 1974 Kawasaki bighorn (f9?) and was haveing trouble finding parts for it. It runs good and drives good but I would like to fix it up a lil more or even make it into a cafe racer

Orignal From: Looking for parts

First bike dealth this weekend here

Even though an auto was in envolved,the biker was killed when three teenage boys with a paintball gun where riding around Friday night shooting people walking or out and about on the sidewalks. these butt bozo's decided to shoot at the head of a man and his wife on a late evening ride ,The news report noted that the man was shot in the face causing his glasses to become covered with the vegetable oil based paint dye coving his line of sight, blinding him when the bike crossed the yellow line hitting a car head on. The police estimated though the motorcycle operator was slowing down he hit the car, traveling at 35mph, and biker was at or near 20 mph . The skid marks that i went today to go see where only aprox 3 feet long made by the car. All three teens are in custody because of an eye witness. The shooter is looking at second degree murder and the car operator is faced with 3rd degree murder and passenger in the back seat as an assory to 3rd degree , my point is please all becarful out there it seams as if the whole world is against us motorcyclist . My fellow bikers, Winter is almost apoun us for an end of the year restbet but still there are and will be plenty more days on two wheels in the north east , please all becarful


Orignal From: First bike dealth this weekend here

BILLY LANE selling off his cars on EBAY!

Checking out old Model A's, looking for restoration ideas for ours, when I came across this auction: Link This auction's over (but Billy's email address is listed in it!): 250009610298 Just found it interesting... Bikers riding in honor of our fallen soldiers $ **************** Walking in Honor

Orignal From: BILLY LANE selling off his cars on EBAY!

Need help shipping you motorcycle...let me do it for you!

I ship motorcycles all over the USA and Worldwide, I work for a reputable company and our prices are very competitive.....for details email me at peter_cockle@nittsu.com


Orignal From: Need help shipping you motorcycle...let me do it for you!

MSF course

i took the msf course... learned pretty much nothing. It's required for me since i'm below 18, but for anyone else who has some experience, i don't recomend the course.


Orignal From: MSF course

here in the UK I rode a Suzuki RG125 gamma back in 91 when I was 17

anyone have one ? .


Orignal From: here in the UK I rode a Suzuki RG125 gamma back in 91 when I was 17

2001 Harley Davidson Sportster XL 1200C

Hello - My hubby has this bike, and is going to get a new bigger bike. I am taking the ABATE class this summer, and want to start riding my own bike. Can anyone tell me please: Can the above bike be lowered enough to accomodate a 5-1 130 pound lady rider? Do you think it will be too heavy for me to control? Would you recommend selling the 1200 and getting the new 883 Sportster Low or any even smaller bike instead? Any advise would be appreciated...THANKS for everyone's input... Tired of being the back seat rider!!!


Orignal From: 2001 Harley Davidson Sportster XL 1200C

If my dog looked like that....

Check item #190031532556 Words fail. The worst thing is some nimrod will buy it as an "investment".


Orignal From: If my dog looked like that....

'00 Victory Sports Cruiser- larger front sproket?

I know I sound like a broken record, but when someone mentions there is one, I would like to know where. Then I will believe them. I don't want or have $300 tax for one from the dealer. I have my tires off being mounted on the front and rear, so now's the time>>>>>>>now. Thanks.


Orignal From: '00 Victory Sports Cruiser- larger front sproket?

Yamaha 1992 XJ600 Seca Low Engline Rumbling and Burping Exhaust

Hey! I've got a 92 XJ600 and noticed yesterday that the engine was making a real low, kind of rumbling grumbling sound (it sounded kinda cool like a hog, but abnormal). I checked the air coming out of the pipes and while both had the normal put put of air coming out, one side would occasionally let out a belch or pop, almost like a small backfire. Is this caused by dirty carbs or something? Thanks! Chris


Orignal From: Yamaha 1992 XJ600 Seca Low Engline Rumbling and Burping Exhaust

Watch out for this!!!!!!!!!!!!!!

Donnie Blake from Kent Washington selling an 01 Heritage softail for 7200.00 Asking for a wire transfer to Ebay account. Second chance offer because orginal bidder could'nt get his loan approved. Using the number 253-239-9514 For Shame!!!!


Orignal From: Watch out for this!!!!!!!!!!!!!!

Pricing a Custom fatboy for ebay.

I was hoping that perhaps some of you motorcycle/e-Bay knowledgeable people out here could give me some input on what I should ask for my bike. I will be listing my 1993 flstf fatboy soon for sale. The title show 27k miles but I have turn it into a show bike. Invested 25k easily. From stretch tanks to Milwaukee Iron fenders and dash to a custom airbrush and paint of 8k alone. Won three first place trophies. I took plenty of pics but from what I see on here bikes don

Orignal From: Pricing a Custom fatboy for ebay.

Harley Enthusiasts...I need your help!

I own a resale shop, and I just got a bad ass Willie G jacket in to consign. The guy pointed out it was a Willie G, showed me a receipt for $495. I didn't know to look at the date of the receipt. Now my husband wonders if it is a collector jacket b/c it's just so cool looking! Any tips on how to know if it's a collectors item? I'm going to put it up on ebay, although I would LOVE to have it in the front window of my store, just want to make sure I don't give it away.


Orignal From: Harley Enthusiasts...I need your help!

Buying a used Ducati 748, What do I look for?

I'm looking at getting a 2001 ducati 748s or 748r. I've never had a duc before and have been told they require lots of maintenance at a high price. Anybody have any insight as to what are certain things to look for when buying a used duc? Problem areas, possible concerns down the road, etc... Are parts really that much more expensive and/or hard to get? Thanks for any help!


Orignal From: Buying a used Ducati 748, What do I look for?

I Need Help Fast!!! Is this listing legit?

My husband has written up a review for me to post on a vintage 1960 panhead rolling chassis that is ending this Friday. Being that he has left me in a bad situation, I have listed this auction exactly as I have been told to do by him, but I am now getting emails from users who have mentioned that this does not appear to be what he says. I really need to know, as this account has become my sole financial income and I have forgotten just about anything I've ever known about scoots since my last bad case of comatose road rash. The item number is... 2 7 0 0 2 9 5 9 2 1 2 3 and ends this coming Friday, Sept. 22, 2006. As I am seriously in dire-straits since leaving N.Y. way back in '93, I am definitely in need of some expert advice and have been quickly reverting(not good) back to my old self of "Crazy Rosie" Thanks for any input, advice, or help, It will all be Sincerely Appreciated.


Orignal From: I Need Help Fast!!! Is this listing legit?

help.....

ok, i bought a wrecked r6 two weeks ago. the auction clearly states NO FRAME damage. i had the bike delivered, bought all new body panels for it and while installing them realized the frame is broken. it has a 1" chunk taken out of the head stock. it's junk, no doubt about it. in the q

Orignal From: help.....

To Pick The Brains

To all the regulars here I wish to say thank you in advance as I know the advice is sound and given with the best of intention,I have lurked here for many a year and have come to the conclution that you folks know about what you speak.


Orignal From: To Pick The Brains

WARNING! This is very DISTURBING! SICK people in this world!

Sep 16, 7:24 AM EDT Charges Dropped in Wis. Necrophilia Case LANCASTER, Wis. (AP) -- A judge on Friday dismissed charges of attempted sexual assault against three men accused of trying to dig up a woman's body to have sex with the corpse, noting that Wisconsin has no law against necrophilia. The men still face lesser charges. Twins Nicholas and Alexander Grunke, 20, and Dustin Radke, 20, were arrested after an alleged attempt to dig up the body of a 20-year-old woman who was killed Aug. 27 in a MOTORCYCLE CRASH. Officials said a caller reported suspicious activity in the cemetery Sept. 2, and deputies found someone had dug down to her vault. Authorities said the three were not acquainted with the woman but had seen an obituary with her photo. Circuit Judge George Curry said that while there was no law that addressed necrophilia, there was enough evidence to continue the case because of criminal damage to property and the alleged attempt to break into a burial vault


Orignal From: WARNING! This is very DISTURBING! SICK people in this world!

Monday, August 24, 2009

NEED A PARTS CATELOG ON A 2005 HRLEY DAVIDSON BIKE

How can I find a parts catelog for 2005Harley Davisdon Bike: Problem my son gave me all these stock parts from his Bike and I do not know anything about them except what he told me

Orignal From: NEED A PARTS CATELOG ON A 2005 HRLEY DAVIDSON BIKE

BIKERS vsMOTORCYCLISTS

whats the difference between a motorcyclist and a biker?besides the obvious that one eats cheerios and the other oatmeal for breakfast????????


Orignal From: BIKERS vsMOTORCYCLISTS

Vintage Bubble Shorty Motorcycle Helmet. Please Help Me Identify

Can someone please help me identify this helmet. Shorty is on the side with Duns on the tag, the inside part of visor has a patent USA number. Is this considered a vintage helmet and if so is it worth posting. Thankyou


Orignal From: Vintage Bubble Shorty Motorcycle Helmet. Please Help Me Identify

HELMET LAWS

how many bikers(and motorcyclists) out there are in favor of manditory helmet laws?how many are opposed?does anyone know any other country in the world where it is legal to ride without a helmet????


Orignal From: HELMET LAWS

Old Leather Stitched Motorcycle helmet - Need help identifying manufacturer

Hello . . . .

Orignal From: Old Leather Stitched Motorcycle helmet - Need help identifying manufacturer

Rare Indian!!

I have a rare indian motorcycle where should i sell it??? HELP


Orignal From: Rare Indian!!

Need Help Please

I have A VW trike with A Honda front end. My front blinkers got broke off and I need to get some more but I dont know What Kind of Honda front end is on it. Any ideas? The blinkers are the kind that screw into the headlight. Any help appreciated.


Orignal From: Need Help Please

Spark Knock and Bad Fuel availability!!

I know this subject is targeted more for the riders of older bikes, as I'm well aware that newer bikes with EFI may have anti-knock sensors that eliminate or reduce the problem. However, I also know that my friend's '03 Road King has EFI, and he is now developing a Spark Knock problem....so perhaps the intended audience will be expanded over the summer. I have 2 HDs...both very similar, but one is virtually free of any spark knock and the other is plagued with it. Both are TC88 motors bored out to 95 CID, and both are carburated. Both have the Screamin' Eagle Ignition Module, both have 2-into-1 exhausts, and both are 'cam'd'. One is an "A" motor on my '00 Dyna (which has NO spark knock) and the other is a "B" motor on my '01 Fatboy. Needless to say, they both get the same gas from the same pump. So, why does one bike perform so differently from the other? Let me just say that I've had this 'discussion' with countless Harley experts, and the opinions are as diverse as the individuals themselves. But...before getting into the 'bike' issue.....let me mention fuel itself. This is a problem that's been around for years, and in some areas it's not getting any better. We're now being faced with all kinds of processes that add oxidizers, detergents, lubricants, and the other day I saw some kind of new 'Technium' additive that really seemed like nothing more than a new way to market the gas. But, the bottom line is that "FUEL" is FULL of additives that can affect this problem. Especially if you get a fuel that has a high level of alcohol incorporated into the mix. So, BEWARE of what's coming out of the pump!! As to the bikes......I can only say that I've dealt with this problem for two summers now....and as I see the temps getting warmer, I'm now starting to hear that classic rattle more frequently. I fear the day when I go to accelerate around a car and I drop a piston from detonation erosion. I may have to pull the heads of my motor just to check my pistons before another summer of riding. But, I am interested in any and every posting that gets submitted....and I hope to learn from them. I've been takin' apart motorcycle engines for nearly 50 years now......but I know I've got plenty to learn! So, any ideas or suggestions....please let me know. Thanks for reading this!! WC


Orignal From: Spark Knock and Bad Fuel availability!!

Ever ride one? Ever own one?? Ever think about them?? Ever seen one??... running???


Orignal From:

Is this Leather Jacket a POLICEMANS 60's/70's??

I believe this is a Policemans Motorcycle Leather Jacket from the 60's/70's. Heavy all TALON Zippers. Am I correct?


Orignal From: Is this Leather Jacket a POLICEMANS 60's/70's??

Motorcycle sidecar fender ?

I found an old fender at a homested on our ranch which appears to be a sidecar fender, but it has 2 wells. It could also be an automobile spare tire carrier. I have photos, but do not see that I can post any here.


Orignal From: Motorcycle sidecar fender ?

Ultima 65mm Inverted Fork Problems

Just wanted to issue a warning to ebayers intending to purchase or sell Ultima's new 65mm inverted front ends. As a retailer of this product, I think it is very important that everyone is aware of a potentially dangerous situation. I recently sold and installed a set of these forks. Upon installation, I noticed a MAJOR design flaw in the axle and axle retaining portion of the forks. The design will allow the axle to slide from side to side if any heavy side loads are applied, i.e. high speed cornering. I noticed this problem and brought it to the attention of the manufacturer. I was told an "engineer" would be in contact with me to discuss the problem. No return call. I contacted them a second time and got the same answer. Still, no return call. I thought I found a way to prevent the problem and naively installed the forks anyway. About 75 miles after the bike left, the wheel walked to the left and locked up the wheel and caused a crash. I am now in a huge mess over this, and while I am taking full responsibility over what happened, I am very angry that the manufacturer has yet to contact me about the problem. The short of this is, until Ultima fixes the problem, be aware of the potential dangers here. As a retailer, you could be named in a lawsuit. As a consumer, you could end up with serious injuries or even death. Sorry to be a downer, but I just want to see everyone safe. Keep the rubber side down.


Orignal From: Ultima 65mm Inverted Fork Problems

Makes one say mmmmmmmmmm

Ok just to stir up some shift here since none has been stirred for years and the stagnant smell is nearly overwhelming... Is there one person on this board that can tell me why..(other than the fact that the SCOOTER just makes more horsepower) An 05 harley 883 sporty with a dry weight of 558 pounds with a NADA book of between $3900 and $4900 can't out run an 05 650cc Suzuki bergman SCOOTER....and BTW also has a NADA between $3900 and $4900.. Now I know the HD out weighs the SCOOTER buy a whole 34 pounds but it also has a displacement advantage of over 233 cubic centimeters.... --


Orignal From: Makes one say mmmmmmmmmm

Dual Sport Bike: Long Road Trip, Need Tire Advice

I'm going to be buying a dual sport bike, likely a KLR 650 or a BMW Prs-Dkr. My road trip will be in Latin America so I'll be on paved highways, urban streets, dirt roads and bumpy cobblestone streets. Do I need to ride with street tires and then carry a set of knobbies too? Thanks for advice!


Orignal From: Dual Sport Bike: Long Road Trip, Need Tire Advice

italian harley davidson info needed.

hello, I been trying to find out some info on italian harley davidsons. I have a 1967, on the lower end it reads "dansi varese made in italy" can anyone help with any kind of info on it and what its worth? I'm just a dumb ol'girl wanting to know some dumb ol' boy stuff. Help! thanks in advance Berta.


Orignal From: italian harley davidson info needed.

Shipping motorcycles

I recently made my first eBay motorcycle purchase. I arranged for Daily Direct to pick it up and deliver it to a local dealer. The price seemed fair enough. The communication has been lousy and the process has been terribly slow. I don't want to slam these folks as they may be a perfectly good company, but I'm a little taken aback at how slow it is and was curious about what other folks were doing about shipping motorcycles long distances. Thanx.


Orignal From: Shipping motorcycles

Discussion Board Help!

I'll begin by introducing myself (always a good starting point). Ex-military, served with honor, ride a Harley (had several), founded a military and veterans club and am helping a friend get his business started up - brand name Bamboo Biker which you can check out online. QUESTIONS - I posted a topic but can't remember on which discussion board. Someone left me a message to read a reply to the topic... "before VERO tags all my items." 1. What is a tag? 2. Who is VERO? 3. There are several discussion boards. How do I find my topic? Thank you!!


Orignal From: Discussion Board Help!

Looking for Help Identifying a Bike in a Photo

Hi, I'm a long-time seller at ebay.com, but hardly ever at ebaymotors. However, I thought I might be able to get some help identifying this old motorbike in a photo I have. You guys were a big help another time when I asked. Here are two views of the photo: Link Link Thanks! Barbara


Orignal From: Looking for Help Identifying a Bike in a Photo

Honda 1981 CB650 Custom starter clutch question

I just bought one of these bikes and the only problem, aside from needing a new chain and normal wear and tear, is the starter clutch. We opened her up and it just flat-out needs replacing. I keep finding them all over the place for cb750s, but wonder if those will fit mine. Some parts, I know, are interchangeable. Is this one? If not, any ideas as to where a cheap one is? A new 750 clutch is around $80, but a new 650 is around $140 or so. Seems like a big leap. Any advice would be greatly appreciated. New bike owner here and fishing for knowledge. Thanks!


Orignal From: Honda 1981 CB650 Custom starter clutch question

Well I don't want a pickle.........

The motorcycle song by Arlo Guthrie. Some things can just never be too old Link


Orignal From: Well I don't want a pickle.........

Tech help!

I'm looking to purchase a set of 1978 triumph bonnie 750cc rocker boxes for my 1968 triumph bonnie 650cc t120r for easyer valve ajustment access. Will this work? Any info would be greatly appreciated. Mike


Orignal From: Tech help!

1965 Cushman Spec -- Need info, please

Hello, all. My husband passed away recently and he was an avid Cushman buff. I have a 1965 black Cushman that hubby said didn't work. It has been sitting for a long time and it also has both tires flat. The machine looks to be in good condition (body wise) and I'm not sure what doesn't work. He probably bought it to refurbish it and never got around to it. You should have seen some of the old Cushman's he did refurbish -- they caught everyone's eye, that's for sure. My question is: Do you think this machine has any value to the collectors? Would it be better to sell it "As Is For Parts"?? I can't take a pic of it right now because it is wedged in a corner and it has stuff in front of it. It is very heavy so I'll have to wait for help to move it and get a pic. Any information you give me will be very much appreciated. Thanks in advance. Dar S


Orignal From: 1965 Cushman Spec -- Need info, please

1971 Triumph Trophy Trail - What's it worth?

Does anyone have any idea what this might be worth? (The seat is in another part of the garage). I don't think it would take much to make it run. Thanks.


Orignal From: 1971 Triumph Trophy Trail - What's it worth?

NEEDED: 1970 New York Motorcycle License Plate

anyone have an original 1970 New York State Motorcycle plate they want to sell?


Orignal From: NEEDED: 1970 New York Motorcycle License Plate

Any body Remember Ghost Motorcycle Sales Port Washington NY

Anybody remember Them I bought quite a few Bikes from him He was a Friend

Orignal From: Any body Remember Ghost Motorcycle Sales Port Washington NY

1980 CB750 Chain

I need to replace my chain on my 1980 CB750, shpuld I go with o-ring or w/o o-ring?


Orignal From: 1980 CB750 Chain

1987 xlh sporster 883

hi im looking for a shifter lever made from steel i got one last year that was made from some cast and it broke in half. also the same bike i have no dash lights and no horn and no front brake light , no left turn sig , the right works and no neutral light. any help would be great


Orignal From: 1987 xlh sporster 883

Looking for advise on Ducati shirt

Hi, I generally sell vintage clothes but bought this Jams World Ferracci Ducati shirt. I think its awesome . So any way. Should I post in ebay motor clothing motorcycle what? I bought this for my hubby but it was too small. Thanks, Kim


Orignal From: Looking for advise on Ducati shirt

What part of the Harley is this?

Sorry, but I know nothing about motorcycles. Is this the engine? the gas tank? the..... what? Thanks for your help. Link


Orignal From: What part of the Harley is this?

I love the boulevard

Nuthin' to do but sit on the porch and watch the tumble weeds blow by. This is the life. I remember back when I was just a sprout. This place was so busy you could hardly git a word in. Peeps talkin' about bikes and havin' fun and gettin' into arguments. Yessir, it sure is better now, I reckon................................not.


Orignal From: I love the boulevard

Wednesday, August 12, 2009

west virginia ride to the beach

would anybody be interested in riding from west virginia to myrtle beach or to florida? im trying to get pp, together for a nice ride



Orignal From: west virginia ride to the beach

Ultima 65mm front end inverted forks

I was wondering why the Ultima 65mm inverted frontend forks were discontinued. I don't think it was a safety issue. They were replaced by the current 58mm inverted forks. I would like to find the 65mm with 6 over to buy. They are getting to be hard to find, I also wonder about getting parts now, such as the seals for them.



Orignal From: Ultima 65mm front end inverted forks

Can anyone tell me info on this Corbin Seat? What motorcycle is it for?

Hello, i came upon this Great CORBIN Motorcycle Seat. i want to put it on eBay but do not know much about it. It is all leather and says the number H75NH on back. If anyone can tell me some advice about what bike its for and what its called, I would really appreciate it ! Thank you guys!



Orignal From: Can anyone tell me info on this Corbin Seat? What motorcycle is it for?

Knucklehead Flywheels

I am trying to get some information on a set Knucklehead Flywheels that I own. I found the numbers 150-40 and 20-5 on the flywheels. It also has a MC insigmia. They are in very good condition. I was hoping somebody could tell me what they are worth. Thank you.



Orignal From: Knucklehead Flywheels

AREA RACING HELMET QUESTION

We have 2 Arai helmets and assume they are for racing motorcycles. Also, the model number appears to be GP-5 and GP-4K. We have done some research and would like to know the value, age and more info on them, prior to listing. We think they are about 8 years old, but unsure. One is brand new in box and the other used, but only slightly. If pics are needed or other info, we will add more. Any input would be greatly appreciated!



Orignal From: AREA RACING HELMET QUESTION

I have a question for gearheads

what's the story with the cam chain tensioner guides being made out of plastic? My broom is in the shop and one of the guides are shot and the other one is ready to cut loose. Did HD do this deliberately? job security? any one know anything about this? is this a recall peaton or not enough complaints about it yet?? cvma-pa.net Veterans Helping Veterans



Orignal From: I have a question for gearheads

Finding Replacement Parts for Triumphs

Just cracked up my Sprint RS and can't find replacement plastic anywhere, not even the Triumph North America site. Last time I busted it up (yes I'm accident prone) I had to wait a month for the plastic to come in to my local dealer and paid top dollar. Anybody know of a better alternative?? I'm ready to give up on Triumph and buy a Japanese brand. Thanks for any help you can offer. Red Mesa



Orignal From: Finding Replacement Parts for Triumphs

Odd-Sized Tires

Hey! I've got an '81 Suzuki GS250T (Impressive, right?). I've been able to find exactly one tire for the front, and NONE for the rear. I need a 3.50-17 rear-mount tube tire, and apparently there are none in existence. Does anyone know where I can find what has turned out to be the hardest tire ever? I'm off the road until I get at least one for the rear.



Orignal From: Odd-Sized Tires

Red Barron Choppers

For those of you that are thinking about buying a Red Barron/DHC frame from ebay. STOP. And read the disscussion below. Not only have I had horrible experience with them, they have bad reviews posted all over the internet. Here is my experience. I had a similar problem with DHC. I bought a frame (Switchblade 250) off eBay around the same time as you did and it took over 7 weeks to get it. No updates or anything from DHC/Red Barron. They are one of the companies that will take your money first and then build the part. I have had noting but problems with the frame. I have had to cut the frame to get the engine to fit. I had to cut the upper motor mount to get the Engine to fit. It doesn't come with axle stops, so I ordered some from them so I could weld them on, and they sent me galvanized hex bolts to weld on the frame. Most recently, and the reason I have posted this is that I went to install a set of forward controls and the left side tapped holes are off center for the controls to mount. I tried both a set of PM controls, and a set of Hammer Customs (Which by the way are excellent controls). I called DHC/Red Barron and Daniel Howe told me that they have been getting lots of calls about the same problem and that all aftermarket parts are not the same design, and that they can't make it to fit all. Everyone knows that this is a line of S**t. All 3-bolt configurations are the same. The holes that DHC drilled and tapped are just off enough to not work. DHC didn't offer to send a new plate to weld on. They told me to drill out the holes and bolt them on with nuts on the back. POOR CRAFTSMANSHIP. I would NOT Recommend this builder. They are seedy and inexperienced. When it comes down to it, they are an armature in a big boys business. They don't build quality products and offer poor customer service. DONT BUY FROM THIS BUILDER.



Orignal From: Red Barron Choppers

Misleading Sale of Item

"What can be done if an item is being sold on eBay and the seller is misleading the bidders with false information !! Example: A vehicle is for sale, the seller says it was wet but not under water! After researching the vehicle in question, I find that it was in a fire and totalled by an insurance company. The seller goes on to say that it was a little rusty, (so he powdercoated it)whereas, the pics from the insurance sale reveal a burned up vehicle. I have proof of the insurance sale. I just know that this is misleading and don't want to see anyone get hurt with the said vehicle." This is on a motorcycle frame that got really toasted. You and I both know what heat does to a frame. Let me know what I can do to keep this sly seller from profiting on something dangerous.



Orignal From: Misleading Sale of Item

new ebay motors

it sucks , it jumps around . cant send items to friends without hassle . i always have to sign in [user and password ] like i never existed . not user friendly at all . and fee;s are out of control ,just like our govorment . pissed and fed -up



Orignal From: new ebay motors

Harley Sportster gas tank, help with years and size, please!

Hi, I have a great looking gas tank here, but I have no idea what years of sportster it will fit, and I do not know what gallon size it is. I hope someone can fill me in by using my dimensions! 17" tunnel, about 8 1/2" wide at the front and 7 1/2" tall at the front going down to about 4 1/2" wide at the back. My picture is in my auctiva acct. sorry for the link! Jennifer Link



Orignal From: Harley Sportster gas tank, help with years and size, please!

2007 GSX-R 600 ....

I just joined the GSX-R Family. I love this bike! Anyway, I want to make my bike unique, can anyone tell me where I can get accessories to put on the bike?



Orignal From: 2007 GSX-R 600 ....

Old Leather Stitched Motorcycle helmet - Need help identifying manufacturer

Hello . . . .

Orignal From: Old Leather Stitched Motorcycle helmet - Need help identifying manufacturer

Original Harley tank, copy or other?

Hello I just picked up this gas tank, my neighbors seem to think it's for a Harley. Is it? and is it original? Is it the original decal and stripping? the Harley decal looks applied. Is it possible to date it?. Sorry for my ignorance, I'm not very knowledgeable on Harley parts. I guess I'm trying to get info so that I can describe for the listing. It looks to be in very good condition. Overall length 18" (including mounting tabs). x 9 1/2" wide. Tunnel measures 1 3/4" wide

Orignal From: Original Harley tank, copy or other?

MSF Class

Chicago-Elston/DMV: I'd like to talk with people who have taken the Motorcycle Safety Foundation (MSF)class. What was your experience (good or bad)? Please indicate what city/location you took the course. As you can see I took mine in Chicago and although I enjoyed the course I had a horrible rider/instructor experience. Perhaps your stories will encourage me. I'll share it once I hear from readers. Thanks!



Orignal From: MSF Class

Harley Sportster gas tank, help with year

Here is an older Harley tank I bought I now see it has a rear flat mounting tab Any one know what years this might be from? Link Thanks Rick H



Orignal From: Harley Sportster gas tank, help with year

Cold weather riding gear

Hi all! 20 years ago or so I had my jacket lined with a great, quilted, extremely warm fabric. Unfortunately, although always toasty, it made my jacket bulky and rather stiff. I'm wondering if anyone has any ideas with today's technology and new cold weather fabrics, what I should use to have it relined? I'm thinking there might be some skiers, climbers, boarders, and all-weather riders who might have something that works for them in extremely cold temps. Thanks for your suggestions!



Orignal From: Cold weather riding gear

Sportster Help!

I know this is probably old hat to a gazillion people, but... I have a 96 Sportster that is in need of a front end rebuild-repair-replacement (39 mm tubes and seals, at least). What front ends are exact replacements? What front end parts are interchangable? Is the only determining issue the stem diameter?



Orignal From: Sportster Help!

Antique Seat ID ?

Any scholars on antique cycles here? Found a neat original old seat that I would appreciate any info on. It is inscribed "Rookie" in the leather. Appears to be a very early motorcycle type. More Pictures are here: Link Link Link Link Link Link



Orignal From: Antique Seat ID ?

'90s Honda CBR600 F2 VS CBR600 F3 -- Difference?

I am new to the motorcycle world so bear with me -- I am thinking of buying a crotch-rocket because I'm tired of the constant work and effort I have to put in to keep my station wagon running. A friend of mine recommended a mid 90s Honda CBR 600 F2 or F3, I have looked around online and have found little to none info on what the difference between the two is... plese explain the difference. Thank you!



Orignal From: '90s Honda CBR600 F2 VS CBR600 F3 -- Difference?

NEED A PARTS CATELOG ON A 2005 HRLEY DAVIDSON BIKE

How can I find a parts catelog for 2005Harley Davisdon Bike: Problem my son gave me all these stock parts from his Bike and I do not know anything about them except what he told me

Orignal From: NEED A PARTS CATELOG ON A 2005 HRLEY DAVIDSON BIKE

Vintage Bubble Shorty Motorcycle Helmet. Please Help Me Identify

Can someone please help me identify this helmet. Shorty is on the side with Duns on the tag, the inside part of visor has a patent USA number. Is this considered a vintage helmet and if so is it worth posting. Thankyou



Orignal From: Vintage Bubble Shorty Motorcycle Helmet. Please Help Me Identify

BIKERS vsMOTORCYCLISTS

whats the difference between a motorcyclist and a biker?besides the obvious that one eats cheerios and the other oatmeal for breakfast????????



Orignal From: BIKERS vsMOTORCYCLISTS

HELMET LAWS

how many bikers(and motorcyclists) out there are in favor of manditory helmet laws?how many are opposed?does anyone know any other country in the world where it is legal to ride without a helmet????



Orignal From: HELMET LAWS

Rare Indian!!

I have a rare indian motorcycle where should i sell it??? HELP



Orignal From: Rare Indian!!

Need Help Please

I have A VW trike with A Honda front end. My front blinkers got broke off and I need to get some more but I dont know What Kind of Honda front end is on it. Any ideas? The blinkers are the kind that screw into the headlight. Any help appreciated.



Orignal From: Need Help Please

Spark Knock and Bad Fuel availability!!

I know this subject is targeted more for the riders of older bikes, as I'm well aware that newer bikes with EFI may have anti-knock sensors that eliminate or reduce the problem. However, I also know that my friend's '03 Road King has EFI, and he is now developing a Spark Knock problem....so perhaps the intended audience will be expanded over the summer. I have 2 HDs...both very similar, but one is virtually free of any spark knock and the other is plagued with it. Both are TC88 motors bored out to 95 CID, and both are carburated. Both have the Screamin' Eagle Ignition Module, both have 2-into-1 exhausts, and both are 'cam'd'. One is an "A" motor on my '00 Dyna (which has NO spark knock) and the other is a "B" motor on my '01 Fatboy. Needless to say, they both get the same gas from the same pump. So, why does one bike perform so differently from the other? Let me just say that I've had this 'discussion' with countless Harley experts, and the opinions are as diverse as the individuals themselves. But...before getting into the 'bike' issue.....let me mention fuel itself. This is a problem that's been around for years, and in some areas it's not getting any better. We're now being faced with all kinds of processes that add oxidizers, detergents, lubricants, and the other day I saw some kind of new 'Technium' additive that really seemed like nothing more than a new way to market the gas. But, the bottom line is that "FUEL" is FULL of additives that can affect this problem. Especially if you get a fuel that has a high level of alcohol incorporated into the mix. So, BEWARE of what's coming out of the pump!! As to the bikes......I can only say that I've dealt with this problem for two summers now....and as I see the temps getting warmer, I'm now starting to hear that classic rattle more frequently. I fear the day when I go to accelerate around a car and I drop a piston from detonation erosion. I may have to pull the heads of my motor just to check my pistons before another summer of riding. But, I am interested in any and every posting that gets submitted....and I hope to learn from them. I've been takin' apart motorcycle engines for nearly 50 years now......but I know I've got plenty to learn! So, any ideas or suggestions....please let me know. Thanks for reading this!! WC



Orignal From: Spark Knock and Bad Fuel availability!!

Motorcycle sidecar fender ?

I found an old fender at a homested on our ranch which appears to be a sidecar fender, but it has 2 wells. It could also be an automobile spare tire carrier. I have photos, but do not see that I can post any here.



Orignal From: Motorcycle sidecar fender ?

Ever ride one? Ever own one?? Ever think about them?? Ever seen one??... running???



Orignal From:

Is this Leather Jacket a POLICEMANS 60's/70's??

I believe this is a Policemans Motorcycle Leather Jacket from the 60's/70's. Heavy all TALON Zippers. Am I correct?



Orignal From: Is this Leather Jacket a POLICEMANS 60's/70's??

Ultima 65mm Inverted Fork Problems

Just wanted to issue a warning to ebayers intending to purchase or sell Ultima's new 65mm inverted front ends. As a retailer of this product, I think it is very important that everyone is aware of a potentially dangerous situation. I recently sold and installed a set of these forks. Upon installation, I noticed a MAJOR design flaw in the axle and axle retaining portion of the forks. The design will allow the axle to slide from side to side if any heavy side loads are applied, i.e. high speed cornering. I noticed this problem and brought it to the attention of the manufacturer. I was told an "engineer" would be in contact with me to discuss the problem. No return call. I contacted them a second time and got the same answer. Still, no return call. I thought I found a way to prevent the problem and naively installed the forks anyway. About 75 miles after the bike left, the wheel walked to the left and locked up the wheel and caused a crash. I am now in a huge mess over this, and while I am taking full responsibility over what happened, I am very angry that the manufacturer has yet to contact me about the problem. The short of this is, until Ultima fixes the problem, be aware of the potential dangers here. As a retailer, you could be named in a lawsuit. As a consumer, you could end up with serious injuries or even death. Sorry to be a downer, but I just want to see everyone safe. Keep the rubber side down.



Orignal From: Ultima 65mm Inverted Fork Problems

Makes one say mmmmmmmmmm

Ok just to stir up some shift here since none has been stirred for years and the stagnant smell is nearly overwhelming... Is there one person on this board that can tell me why..(other than the fact that the SCOOTER just makes more horsepower) An 05 harley 883 sporty with a dry weight of 558 pounds with a NADA book of between $3900 and $4900 can't out run an 05 650cc Suzuki bergman SCOOTER....and BTW also has a NADA between $3900 and $4900.. Now I know the HD out weighs the SCOOTER buy a whole 34 pounds but it also has a displacement advantage of over 233 cubic centimeters....



Orignal From: Makes one say mmmmmmmmmm

Shipping motorcycles

I recently made my first eBay motorcycle purchase. I arranged for Daily Direct to pick it up and deliver it to a local dealer. The price seemed fair enough. The communication has been lousy and the process has been terribly slow. I don't want to slam these folks as they may be a perfectly good company, but I'm a little taken aback at how slow it is and was curious about what other folks were doing about shipping motorcycles long distances. Thanx.



Orignal From: Shipping motorcycles

Dual Sport Bike: Long Road Trip, Need Tire Advice

I'm going to be buying a dual sport bike, likely a KLR 650 or a BMW Prs-Dkr. My road trip will be in Latin America so I'll be on paved highways, urban streets, dirt roads and bumpy cobblestone streets. Do I need to ride with street tires and then carry a set of knobbies too? Thanks for advice!



Orignal From: Dual Sport Bike: Long Road Trip, Need Tire Advice

italian harley davidson info needed.

hello, I been trying to find out some info on italian harley davidsons. I have a 1967, on the lower end it reads "dansi varese made in italy" can anyone help with any kind of info on it and what its worth? I'm just a dumb ol'girl wanting to know some dumb ol' boy stuff. Help! thanks in advance Berta.



Orignal From: italian harley davidson info needed.

Discussion Board Help!

I'll begin by introducing myself (always a good starting point). Ex-military, served with honor, ride a Harley (had several), founded a military and veterans club and am helping a friend get his business started up - brand name Bamboo Biker which you can check out online. QUESTIONS - I posted a topic but can't remember on which discussion board. Someone left me a message to read a reply to the topic... "before VERO tags all my items." 1. What is a tag? 2. Who is VERO? 3. There are several discussion boards. How do I find my topic? Thank you!!



Orignal From: Discussion Board Help!

Honda 1981 CB650 Custom starter clutch question

I just bought one of these bikes and the only problem, aside from needing a new chain and normal wear and tear, is the starter clutch. We opened her up and it just flat-out needs replacing. I keep finding them all over the place for cb750s, but wonder if those will fit mine. Some parts, I know, are interchangeable. Is this one? If not, any ideas as to where a cheap one is? A new 750 clutch is around $80, but a new 650 is around $140 or so. Seems like a big leap. Any advice would be greatly appreciated. New bike owner here and fishing for knowledge. Thanks!



Orignal From: Honda 1981 CB650 Custom starter clutch question

Buying a bike when the bank holds the title

How do people typically do this on ebay? Is there anything special to be concerned about with respect to scams? I'm very interested in a motorcycle that is listed out of state, but the bank is still holding the title. Any input is greatly appreciated. Thanks.



Orignal From: Buying a bike when the bank holds the title

Looking for Help Identifying a Bike in a Photo

Hi, I'm a long-time seller at ebay.com, but hardly ever at ebaymotors. However, I thought I might be able to get some help identifying this old motorbike in a photo I have. You guys were a big help another time when I asked. Here are two views of the photo: Link Link Thanks! Barbara



Orignal From: Looking for Help Identifying a Bike in a Photo

Selling a bike for someone else?

Hello to all you motorcycle enthusiats. I have a question for which I found no answer in the search pages. I have a close family member who wants to sell a motorcycle and asked if I could list it for him. I told him that I thought Ebay had a policy against that since it's not legally owned by me, the would-be seller. However, I scanned the search pages and found nothing specific. Can anyone point me to part of the user agreement/private policy that would address this question for me? Thanks in advance.



Orignal From: Selling a bike for someone else?

Tech help!

I'm looking to purchase a set of 1978 triumph bonnie 750cc rocker boxes for my 1968 triumph bonnie 650cc t120r for easyer valve ajustment access. Will this work? Any info would be greatly appreciated. Mike



Orignal From: Tech help!

Well I don't want a pickle.........

The motorcycle song by Arlo Guthrie. Some things can just never be too old Link



Orignal From: Well I don't want a pickle.........

1965 Cushman Spec -- Need info, please

Hello, all. My husband passed away recently and he was an avid Cushman buff. I have a 1965 black Cushman that hubby said didn't work. It has been sitting for a long time and it also has both tires flat. The machine looks to be in good condition (body wise) and I'm not sure what doesn't work. He probably bought it to refurbish it and never got around to it. You should have seen some of the old Cushman's he did refurbish -- they caught everyone's eye, that's for sure. My question is: Do you think this machine has any value to the collectors? Would it be better to sell it "As Is For Parts"?? I can't take a pic of it right now because it is wedged in a corner and it has stuff in front of it. It is very heavy so I'll have to wait for help to move it and get a pic. Any information you give me will be very much appreciated. Thanks in advance. Dar S



Orignal From: 1965 Cushman Spec -- Need info, please

1971 Triumph Trophy Trail - What's it worth?

Does anyone have any idea what this might be worth? (The seat is in another part of the garage). I don't think it would take much to make it run. Thanks.



Orignal From: 1971 Triumph Trophy Trail - What's it worth?

Thursday, August 6, 2009

New Florida laws

Here's a RRW article about new laws in Fla. it concerns wheelies and licence tag location. Link Also, there was some news in RRW about New Hampshire and mufflers/ noise. Pretty much if you don't have stock baffled pipes, I stay away from Bike Week, both in NH and Fla. The citizens have finally spoken and your loud bikes are no longer welcome. Just don't shoot the messenger! CH



Orignal From: New Florida laws

Age on this jacket...

...and would the experts here really consider this a motorcycle jacket? I picked it up about 5 years ago, wore it a couple of times, then put it away. I know it's older, but can anyone here date it from the details? It has Talon zippers, a plaid lining, and belted sides. No labels, and the only real clue to the age I have is that there was a matchbook in the chest pocket that looked like it was from the 50's. My knowledge of motorcycle jackets starts and ends with the 80's and the Ramones, so I don't want to misrepresent this when I list it. Any help would be appreciated...or if you just want to make fun of the whole 80's thing, I'm okay with that too.



Orignal From: Age on this jacket...

Ultima 65mm front end inverted forks

I was wondering why the Ultima 65mm inverted frontend forks were discontinued. I don't think it was a safety issue. They were replaced by the current 58mm inverted forks. I would like to find the 65mm with 6 over to buy. They are getting to be hard to find, I also wonder about getting parts now, such as the seals for them.



Orignal From: Ultima 65mm front end inverted forks

west virginia ride to the beach

would anybody be interested in riding from west virginia to myrtle beach or to florida? im trying to get pp, together for a nice ride



Orignal From: west virginia ride to the beach

Can anyone tell me info on this Corbin Seat? What motorcycle is it for?

Hello, i came upon this Great CORBIN Motorcycle Seat. i want to put it on eBay but do not know much about it. It is all leather and says the number H75NH on back. If anyone can tell me some advice about what bike its for and what its called, I would really appreciate it ! Thank you guys!



Orignal From: Can anyone tell me info on this Corbin Seat? What motorcycle is it for?

Knucklehead Flywheels

I am trying to get some information on a set Knucklehead Flywheels that I own. I found the numbers 150-40 and 20-5 on the flywheels. It also has a MC insigmia. They are in very good condition. I was hoping somebody could tell me what they are worth. Thank you.



Orignal From: Knucklehead Flywheels

AREA RACING HELMET QUESTION

We have 2 Arai helmets and assume they are for racing motorcycles. Also, the model number appears to be GP-5 and GP-4K. We have done some research and would like to know the value, age and more info on them, prior to listing. We think they are about 8 years old, but unsure. One is brand new in box and the other used, but only slightly. If pics are needed or other info, we will add more. Any input would be greatly appreciated!



Orignal From: AREA RACING HELMET QUESTION

Finding Replacement Parts for Triumphs

Just cracked up my Sprint RS and can't find replacement plastic anywhere, not even the Triumph North America site. Last time I busted it up (yes I'm accident prone) I had to wait a month for the plastic to come in to my local dealer and paid top dollar. Anybody know of a better alternative?? I'm ready to give up on Triumph and buy a Japanese brand. Thanks for any help you can offer. Red Mesa



Orignal From: Finding Replacement Parts for Triumphs

I have a question for gearheads

what's the story with the cam chain tensioner guides being made out of plastic? My broom is in the shop and one of the guides are shot and the other one is ready to cut loose. Did HD do this deliberately? job security? any one know anything about this? is this a recall peaton or not enough complaints about it yet?? cvma-pa.net Veterans Helping Veterans



Orignal From: I have a question for gearheads

Odd-Sized Tires

Hey! I've got an '81 Suzuki GS250T (Impressive, right?). I've been able to find exactly one tire for the front, and NONE for the rear. I need a 3.50-17 rear-mount tube tire, and apparently there are none in existence. Does anyone know where I can find what has turned out to be the hardest tire ever? I'm off the road until I get at least one for the rear.



Orignal From: Odd-Sized Tires

Red Barron Choppers

For those of you that are thinking about buying a Red Barron/DHC frame from ebay. STOP. And read the disscussion below. Not only have I had horrible experience with them, they have bad reviews posted all over the internet. Here is my experience. I had a similar problem with DHC. I bought a frame (Switchblade 250) off eBay around the same time as you did and it took over 7 weeks to get it. No updates or anything from DHC/Red Barron. They are one of the companies that will take your money first and then build the part. I have had noting but problems with the frame. I have had to cut the frame to get the engine to fit. I had to cut the upper motor mount to get the Engine to fit. It doesn't come with axle stops, so I ordered some from them so I could weld them on, and they sent me galvanized hex bolts to weld on the frame. Most recently, and the reason I have posted this is that I went to install a set of forward controls and the left side tapped holes are off center for the controls to mount. I tried both a set of PM controls, and a set of Hammer Customs (Which by the way are excellent controls). I called DHC/Red Barron and Daniel Howe told me that they have been getting lots of calls about the same problem and that all aftermarket parts are not the same design, and that they can't make it to fit all. Everyone knows that this is a line of S**t. All 3-bolt configurations are the same. The holes that DHC drilled and tapped are just off enough to not work. DHC didn't offer to send a new plate to weld on. They told me to drill out the holes and bolt them on with nuts on the back. POOR CRAFTSMANSHIP. I would NOT Recommend this builder. They are seedy and inexperienced. When it comes down to it, they are an armature in a big boys business. They don't build quality products and offer poor customer service. DONT BUY FROM THIS BUILDER.



Orignal From: Red Barron Choppers

Misleading Sale of Item

"What can be done if an item is being sold on eBay and the seller is misleading the bidders with false information !! Example: A vehicle is for sale, the seller says it was wet but not under water! After researching the vehicle in question, I find that it was in a fire and totalled by an insurance company. The seller goes on to say that it was a little rusty, (so he powdercoated it)whereas, the pics from the insurance sale reveal a burned up vehicle. I have proof of the insurance sale. I just know that this is misleading and don't want to see anyone get hurt with the said vehicle." This is on a motorcycle frame that got really toasted. You and I both know what heat does to a frame. Let me know what I can do to keep this sly seller from profiting on something dangerous.



Orignal From: Misleading Sale of Item

new ebay motors

it sucks , it jumps around . cant send items to friends without hassle . i always have to sign in [user and password ] like i never existed . not user friendly at all . and fee;s are out of control ,just like our govorment . pissed and fed -up



Orignal From: new ebay motors

Harley Sportster gas tank, help with years and size, please!

Hi, I have a great looking gas tank here, but I have no idea what years of sportster it will fit, and I do not know what gallon size it is. I hope someone can fill me in by using my dimensions! 17" tunnel, about 8 1/2" wide at the front and 7 1/2" tall at the front going down to about 4 1/2" wide at the back. My picture is in my auctiva acct. sorry for the link! Jennifer Link



Orignal From: Harley Sportster gas tank, help with years and size, please!

MSF Class

Chicago-Elston/DMV: I'd like to talk with people who have taken the Motorcycle Safety Foundation (MSF)class. What was your experience (good or bad)? Please indicate what city/location you took the course. As you can see I took mine in Chicago and although I enjoyed the course I had a horrible rider/instructor experience. Perhaps your stories will encourage me. I'll share it once I hear from readers. Thanks!



Orignal From: MSF Class

Sportster Help!

I know this is probably old hat to a gazillion people, but... I have a 96 Sportster that is in need of a front end rebuild-repair-replacement (39 mm tubes and seals, at least). What front ends are exact replacements? What front end parts are interchangable? Is the only determining issue the stem diameter?



Orignal From: Sportster Help!

Original Harley tank, copy or other?

Hello I just picked up this gas tank, my neighbors seem to think it's for a Harley. Is it? and is it original? Is it the original decal and stripping? the Harley decal looks applied. Is it possible to date it?. Sorry for my ignorance, I'm not very knowledgeable on Harley parts. I guess I'm trying to get info so that I can describe for the listing. It looks to be in very good condition. Overall length 18" (including mounting tabs). x 9 1/2" wide. Tunnel measures 1 3/4" wide

Orignal From: Original Harley tank, copy or other?

Harley Sportster gas tank, help with year

Here is an older Harley tank I bought I now see it has a rear flat mounting tab Any one know what years this might be from? Link Thanks Rick H



Orignal From: Harley Sportster gas tank, help with year

Cold weather riding gear

Hi all! 20 years ago or so I had my jacket lined with a great, quilted, extremely warm fabric. Unfortunately, although always toasty, it made my jacket bulky and rather stiff. I'm wondering if anyone has any ideas with today's technology and new cold weather fabrics, what I should use to have it relined? I'm thinking there might be some skiers, climbers, boarders, and all-weather riders who might have something that works for them in extremely cold temps. Thanks for your suggestions!



Orignal From: Cold weather riding gear

2007 GSX-R 600 ....

I just joined the GSX-R Family. I love this bike! Anyway, I want to make my bike unique, can anyone tell me where I can get accessories to put on the bike?



Orignal From: 2007 GSX-R 600 ....

Antique Seat ID ?

Any scholars on antique cycles here? Found a neat original old seat that I would appreciate any info on. It is inscribed "Rookie" in the leather. Appears to be a very early motorcycle type. More Pictures are here: Link Link Link Link Link Link



Orignal From: Antique Seat ID ?

'90s Honda CBR600 F2 VS CBR600 F3 -- Difference?

I am new to the motorcycle world so bear with me -- I am thinking of buying a crotch-rocket because I'm tired of the constant work and effort I have to put in to keep my station wagon running. A friend of mine recommended a mid 90s Honda CBR 600 F2 or F3, I have looked around online and have found little to none info on what the difference between the two is... plese explain the difference. Thank you!



Orignal From: '90s Honda CBR600 F2 VS CBR600 F3 -- Difference?

NEED A PARTS CATELOG ON A 2005 HRLEY DAVIDSON BIKE

How can I find a parts catelog for 2005Harley Davisdon Bike: Problem my son gave me all these stock parts from his Bike and I do not know anything about them except what he told me

Orignal From: NEED A PARTS CATELOG ON A 2005 HRLEY DAVIDSON BIKE

Vintage Bubble Shorty Motorcycle Helmet. Please Help Me Identify

Can someone please help me identify this helmet. Shorty is on the side with Duns on the tag, the inside part of visor has a patent USA number. Is this considered a vintage helmet and if so is it worth posting. Thankyou



Orignal From: Vintage Bubble Shorty Motorcycle Helmet. Please Help Me Identify

BIKERS vsMOTORCYCLISTS

whats the difference between a motorcyclist and a biker?besides the obvious that one eats cheerios and the other oatmeal for breakfast????????



Orignal From: BIKERS vsMOTORCYCLISTS

HELMET LAWS

how many bikers(and motorcyclists) out there are in favor of manditory helmet laws?how many are opposed?does anyone know any other country in the world where it is legal to ride without a helmet????



Orignal From: HELMET LAWS

Old Leather Stitched Motorcycle helmet - Need help identifying manufacturer

Hello . . . .

Orignal From: Old Leather Stitched Motorcycle helmet - Need help identifying manufacturer

Need Help Please

I have A VW trike with A Honda front end. My front blinkers got broke off and I need to get some more but I dont know What Kind of Honda front end is on it. Any ideas? The blinkers are the kind that screw into the headlight. Any help appreciated.



Orignal From: Need Help Please

Rare Indian!!

I have a rare indian motorcycle where should i sell it??? HELP



Orignal From: Rare Indian!!

Ever ride one? Ever own one?? Ever think about them?? Ever seen one??... running???



Orignal From:

Spark Knock and Bad Fuel availability!!

I know this subject is targeted more for the riders of older bikes, as I'm well aware that newer bikes with EFI may have anti-knock sensors that eliminate or reduce the problem. However, I also know that my friend's '03 Road King has EFI, and he is now developing a Spark Knock problem....so perhaps the intended audience will be expanded over the summer. I have 2 HDs...both very similar, but one is virtually free of any spark knock and the other is plagued with it. Both are TC88 motors bored out to 95 CID, and both are carburated. Both have the Screamin' Eagle Ignition Module, both have 2-into-1 exhausts, and both are 'cam'd'. One is an "A" motor on my '00 Dyna (which has NO spark knock) and the other is a "B" motor on my '01 Fatboy. Needless to say, they both get the same gas from the same pump. So, why does one bike perform so differently from the other? Let me just say that I've had this 'discussion' with countless Harley experts, and the opinions are as diverse as the individuals themselves. But...before getting into the 'bike' issue.....let me mention fuel itself. This is a problem that's been around for years, and in some areas it's not getting any better. We're now being faced with all kinds of processes that add oxidizers, detergents, lubricants, and the other day I saw some kind of new 'Technium' additive that really seemed like nothing more than a new way to market the gas. But, the bottom line is that "FUEL" is FULL of additives that can affect this problem. Especially if you get a fuel that has a high level of alcohol incorporated into the mix. So, BEWARE of what's coming out of the pump!! As to the bikes......I can only say that I've dealt with this problem for two summers now....and as I see the temps getting warmer, I'm now starting to hear that classic rattle more frequently. I fear the day when I go to accelerate around a car and I drop a piston from detonation erosion. I may have to pull the heads of my motor just to check my pistons before another summer of riding. But, I am interested in any and every posting that gets submitted....and I hope to learn from them. I've been takin' apart motorcycle engines for nearly 50 years now......but I know I've got plenty to learn! So, any ideas or suggestions....please let me know. Thanks for reading this!! WC



Orignal From: Spark Knock and Bad Fuel availability!!

Selling a bike for someone else?

Hello to all you motorcycle enthusiats. I have a question for which I found no answer in the search pages. I have a close family member who wants to sell a motorcycle and asked if I could list it for him. I told him that I thought Ebay had a policy against that since it's not legally owned by me, the would-be seller. However, I scanned the search pages and found nothing specific. Can anyone point me to part of the user agreement/private policy that would address this question for me? Thanks in advance.



Orignal From: Selling a bike for someone else?

Motorcycle sidecar fender ?

I found an old fender at a homested on our ranch which appears to be a sidecar fender, but it has 2 wells. It could also be an automobile spare tire carrier. I have photos, but do not see that I can post any here.



Orignal From: Motorcycle sidecar fender ?

Dual Sport Bike: Long Road Trip, Need Tire Advice

I'm going to be buying a dual sport bike, likely a KLR 650 or a BMW Prs-Dkr. My road trip will be in Latin America so I'll be on paved highways, urban streets, dirt roads and bumpy cobblestone streets. Do I need to ride with street tires and then carry a set of knobbies too? Thanks for advice!



Orignal From: Dual Sport Bike: Long Road Trip, Need Tire Advice

Is this Leather Jacket a POLICEMANS 60's/70's??

I believe this is a Policemans Motorcycle Leather Jacket from the 60's/70's. Heavy all TALON Zippers. Am I correct?



Orignal From: Is this Leather Jacket a POLICEMANS 60's/70's??

Ultima 65mm Inverted Fork Problems

Just wanted to issue a warning to ebayers intending to purchase or sell Ultima's new 65mm inverted front ends. As a retailer of this product, I think it is very important that everyone is aware of a potentially dangerous situation. I recently sold and installed a set of these forks. Upon installation, I noticed a MAJOR design flaw in the axle and axle retaining portion of the forks. The design will allow the axle to slide from side to side if any heavy side loads are applied, i.e. high speed cornering. I noticed this problem and brought it to the attention of the manufacturer. I was told an "engineer" would be in contact with me to discuss the problem. No return call. I contacted them a second time and got the same answer. Still, no return call. I thought I found a way to prevent the problem and naively installed the forks anyway. About 75 miles after the bike left, the wheel walked to the left and locked up the wheel and caused a crash. I am now in a huge mess over this, and while I am taking full responsibility over what happened, I am very angry that the manufacturer has yet to contact me about the problem. The short of this is, until Ultima fixes the problem, be aware of the potential dangers here. As a retailer, you could be named in a lawsuit. As a consumer, you could end up with serious injuries or even death. Sorry to be a downer, but I just want to see everyone safe. Keep the rubber side down.



Orignal From: Ultima 65mm Inverted Fork Problems

Makes one say mmmmmmmmmm

Ok just to stir up some shift here since none has been stirred for years and the stagnant smell is nearly overwhelming... Is there one person on this board that can tell me why..(other than the fact that the SCOOTER just makes more horsepower) An 05 harley 883 sporty with a dry weight of 558 pounds with a NADA book of between $3900 and $4900 can't out run an 05 650cc Suzuki bergman SCOOTER....and BTW also has a NADA between $3900 and $4900.. Now I know the HD out weighs the SCOOTER buy a whole 34 pounds but it also has a displacement advantage of over 233 cubic centimeters....



Orignal From: Makes one say mmmmmmmmmm

Shipping motorcycles

I recently made my first eBay motorcycle purchase. I arranged for Daily Direct to pick it up and deliver it to a local dealer. The price seemed fair enough. The communication has been lousy and the process has been terribly slow. I don't want to slam these folks as they may be a perfectly good company, but I'm a little taken aback at how slow it is and was curious about what other folks were doing about shipping motorcycles long distances. Thanx.



Orignal From: Shipping motorcycles

italian harley davidson info needed.

hello, I been trying to find out some info on italian harley davidsons. I have a 1967, on the lower end it reads "dansi varese made in italy" can anyone help with any kind of info on it and what its worth? I'm just a dumb ol'girl wanting to know some dumb ol' boy stuff. Help! thanks in advance Berta.



Orignal From: italian harley davidson info needed.

Discussion Board Help!

I'll begin by introducing myself (always a good starting point). Ex-military, served with honor, ride a Harley (had several), founded a military and veterans club and am helping a friend get his business started up - brand name Bamboo Biker which you can check out online. QUESTIONS - I posted a topic but can't remember on which discussion board. Someone left me a message to read a reply to the topic... "before VERO tags all my items." 1. What is a tag? 2. Who is VERO? 3. There are several discussion boards. How do I find my topic? Thank you!!



Orignal From: Discussion Board Help!

Honda 1981 CB650 Custom starter clutch question

I just bought one of these bikes and the only problem, aside from needing a new chain and normal wear and tear, is the starter clutch. We opened her up and it just flat-out needs replacing. I keep finding them all over the place for cb750s, but wonder if those will fit mine. Some parts, I know, are interchangeable. Is this one? If not, any ideas as to where a cheap one is? A new 750 clutch is around $80, but a new 650 is around $140 or so. Seems like a big leap. Any advice would be greatly appreciated. New bike owner here and fishing for knowledge. Thanks!



Orignal From: Honda 1981 CB650 Custom starter clutch question

Looking for Help Identifying a Bike in a Photo

Hi, I'm a long-time seller at ebay.com, but hardly ever at ebaymotors. However, I thought I might be able to get some help identifying this old motorbike in a photo I have. You guys were a big help another time when I asked. Here are two views of the photo: Link Link Thanks! Barbara



Orignal From: Looking for Help Identifying a Bike in a Photo

Buying a bike when the bank holds the title

How do people typically do this on ebay? Is there anything special to be concerned about with respect to scams? I'm very interested in a motorcycle that is listed out of state, but the bank is still holding the title. Any input is greatly appreciated. Thanks.



Orignal From: Buying a bike when the bank holds the title

Tech help!

I'm looking to purchase a set of 1978 triumph bonnie 750cc rocker boxes for my 1968 triumph bonnie 650cc t120r for easyer valve ajustment access. Will this work? Any info would be greatly appreciated. Mike



Orignal From: Tech help!

Well I don't want a pickle.........

The motorcycle song by Arlo Guthrie. Some things can just never be too old Link



Orignal From: Well I don't want a pickle.........

Sunday, August 2, 2009

Ignition and rear lighting sub-harness 1998FLHR

Hi,I`m looking for the two sub-harnesses,one for the ignition and one for the rear lighting for a 1998 FLHR(road king carbureted model). I have the main harness for the bike but not the 2 subs,and they are no longer available from harley.Anyone out there have one or know where I can find these?? Thanks.



Orignal From: Ignition and rear lighting sub-harness 1998FLHR

WANTED:Joe Rocket Eddie Lawson Jacket!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi there!I'm KZ650Dave...I'm searching for a Joe Rocket Eddie Lawson jacket in a size Small/38 or 40...ANY help would be GREATLY APPRECIATED!! P.S. I am a common man and NOT rich...if you have one to sell me,PLEASE be fair about it...kz650dave@yahoo.com...Thanks,KZ650Dave



Orignal From: WANTED:Joe Rocket Eddie Lawson Jacket!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Harley charging issue.....

Got a tough one. 2002 Harley fatboy. Set a low voltage code. Replaced original battery(low charge) and tested charging system. Everything checked out with my tester. Took bike to dealership to have historical code removed from bike. Just for the hell of it I have them check charging system. System checks out ok. Figure I have found the problem (5 yr old battery) A month later set another code. Check battery with meter it's low. recharge battery and take it back to local battery supply outlet for load test. They tell me it's fine but give me another battery anyway. Back to Dealer to remove code and have them do one more system check. Bike checks out ok again. I bought a Kuryakan battery gauge to monitor system while riding. Hook it up and start bike and let idle. Bike not showing a charge on gauge(lights left side) are in yellow. Green(center) means system charging. Yellow lights on far right mean overcharge. Throttle bike up and still no change. Let off throttle and lights on gauge appeared to spike from yellow no charge to grren and over to yellow over charge. Gauge then dropped back down to yellow no charge. It did this twice very quickly. Shut bike off. Check battery with tester and it reads 13.65. Restart bike and check charging system 14.50. Check new battery gauge and light is in green which means normal charging....but wait code is set again evidently from spike. I took bike out and rode it for two straight hours and charging system stayed in green(light) where it belonged. I'm thinking voltage regulator. Any ideas?...No, mountain,I don't want no stinkin victory. I'd rather have a root canal. No offense to any victory owners. I'm sure they are fine motorcycles. PS: bike runs great starts right up and no slow crank when starting. If the light code did not set I would not know I had a problem.



Orignal From: Harley charging issue.....